Schmidt Technology
  1. Home
  2. Schmidt Technology

Schmidt Technology

Visit Website
Level Image
SCHMIDT Flow Sensor Range.

  • SS 20.650 Chamber head sensor

    For measuring directly behind screw compressors. Measuring range: air velocities from 0.2 to 60 m/s. Temperatures up to +350 °C; up to 16 bar overpressure. Very precise due to high precision adjustment with calibration certificate (optional). Installation length: standard up to 1000 mm, special lengths between 400 and 1000 mm available. Robust construction with all-metal design. Additional impulse and relays output. Easy installation and replacement. Also available as fieldbus version (Profibus / DeviceNet).

  • SS 20.600 Chamber head sensor

    Measuring range: air velocities from 0.2 to 220 m/s; up to 40 bar overpressure. Robust construction with all-metal design. Pipe diameters: DN 25 to DN 600. Additional impulse and relays output. Easy installation and replacement. Also available as ATEX version (Cat. 3, Zone 2). Easy to clean (blowing out or cleaning with water). Also available as fieldbus version (Profibus/DeviceNet).

  • SS 20.500 Dumb-bell head sensor

    Measuring range: air velocities from 0.06 to 50 m/s. Very precise due to high precision adjustment with calibration certificate (optional). Sturdy all-metal housing. Also available as ATEX version (Cat. 3, Zone 2). Also available as separated version (sensor tube and electronics housing separated). Special coating against aggressive gases (optional). Easy installation via through-bolt joint or mounting flange.

  • SS 20.200 Dumb-bell head sensor

    Flow monitors with switching output. Switching range: flow velocities up to 20 m/s. LED display if value exceeds or drops below switching point. Switching point can be set with integrated potentiometer. Temperature compensation prevents any influence on switching point in case of temperature changes. Special protective coating against aggressive gases.

  • SS 20.260 Chamber head sensor

    Flow and temperature measurement under atmospheric pressure. Measuring range: flow velocities up to 50 m/s and temperatures up to +120 °C. Easy installation due to compact design Installation lengths: 50 to 500 mm. Very precise due to high precision adjustment with calibration certificate(optional). Integrated temperature measurement (optional).

  • SS 20.261 Chamber head sensor

    Inexpensive immersion sensor up to 10 bar overpressure of media. Measuring range: air velocities up to 90 m/s. Temperatures up to +85 °C. Pipe diameters: DN 25 to DN 600. Easy installation with supplied through-bolt joint. Very precise due to high precision adjustment with calibration certificate (optional).

  • SS 30.30X Inline sensor

    Integrated measuring section. Measuring range: flow volumes up to 712 m3/h. Integrated LED display. Analog or switching output. Easy installation (plug and play). Pipe diameters: DN 15 to DN 50. Up to 16 bar over pressure.

  • MD 10.010/015 LED measured value display

    Display of flow velocity or flow volume. Easy installation through sturdy wall housing (IP 65). Electrical supply via standard mains (i.e. 230 V). Electrical supply of connected sensor. Model with accumulator function and 2. measuring signal input. Automatic switching of current or voltage outputs depending on load. Output signals freely scalable and 2 relay outputs (230 V, 2 A) with alarm function. Can also be used for other sensors with standard outputs (i.e. pressure, temperature, humidity). Detection of flow direction (patented).

Back to Suppliers